Design advantages of suspension with electric push rod indirect transmission

Today's new electric push rod includes a motor and radiator, and a fixed sleeve is installed at the bottom of the fuselage. Now the product structure is scientific and reasonable, safe and convenient to use, and it is provided with a soft cavity, etc., and the lubricating oil in the cavity is squeezed out from the oil outlet hole through the button to facilitate the addition of lubricating oil. The muffler with muffler components and muffler sleeves, honeycomb layer and silencing cotton are used to reduce the noise of the electric push rod.

At present, the suspension device with indirect transmission of electric push rod is designed, and the workbench is the most widely used in the laboratory. In order to maintain the stability in operation, the reliability and bearing capacity of the bed are the key points in the design of the workbench. Therefore, the mechanical transmission or hydraulic system has been designed to drive the original parts. With the development of technology, the thrust and reliability of the electric push rod can meet the needs of the design standards of the console.

At present, the used electric push rod includes cylinder, main nut, hollow push rod and screw, and the end of the hollow push rod is screwed into the nut seat of the main nut and fixed in a main body, and then tightly installed in the cylinder tube. The screw is installed in the inner cavities of the main nut and the hollow push rod, and the screw is in threaded fit with the main nut, and the output shaft of the reducer is drivingly connected. Therefore, the upper end and the lower end of the electric push rod are respectively provided with sealing devices, and the outer surface of the hollow push rod is treated by electroplating, painting or industrial ceramics.

The current electric push rod device comprises a threaded push rod, a motor, a driving gear, a driven wheel, a fixing bracket with a through hole, and the driving gear, wherein the driven wheel and the fixing bracket are made of plastic materials, the motor is fixed on the fixing bracket, the driving gear is arranged on the rotating shaft of the motor, and the driven gear is arranged at the other end of the threaded pipe, so the current product has the advantages of low cost and convenient maintenance.