Practical application requirements of electric push rod

Today's anti-falling structure of inner tube of electric push rod belongs to the technical field of electric lifting equipment, which comprises a movable tube sleeved outside a screw, the screw includes a driving end and a holding end, and an anti-falling block is connected to the screw through a bolt, a gasket is arranged between the anti-falling block and the bolt, and a buffer sheet for dismounting the anti-falling block is arranged on the screw and the screw. Now, the product design is reasonable and the structure is novel, and the push rod has high comprehensive strength and good stability, which can prevent the inner tube from falling off and greatly improve the safety of the push rod.

The present product belongs to the technical field of linear motors. The electric push rod used now includes a push rod and a cylinder body, one end of which is a magnet end, the push rod end and the magnet end of the push rod are placed in the cylinder body, the electromagnetic coil is placed at the top and the tail of the cylinder body, the middle part of the cylinder body is a reciprocating motion space of the push rod, the electromagnetic coil wire is connected with an external power supply, and the axis of the electromagnetic coil and the axial direction of the magnet are connected with the cylinder body. The present product electric push rod has the advantages of linear motor push rod, large starting force, high reciprocating frequency and high frequency.

The load-bearing structure of today's electric push rod with large thrust and wide range belongs to the technical field of electric lifting equipment, including a load-bearing module arranged on the electric push rod and an electric push rod arranged inside. The load-bearing bearing cavity of the internal load-bearing module is provided with two thrust bearings, and its fixing device is screwed to the outside of the load-bearing part, which includes a reinforcing part and a connecting part. The diameter of the reinforcing part is larger than the setting of the connecting part. The current product is reasonable in design and novel in structure.

In today's electric push rod, the end cover is fixed on one side of the back cup to the outer tube, and the outer tube is provided with a rod end guide sleeve, which extends to the end cover, and its bolts are fixed on the outer tube through the end cover and the distance cup in turn, so that the distance cup and the outer tube are fixed by bolts, which reduces the accuracy of the electric push rod.